Speedwire is a revolutionary laser welding wire dispenser designed to give laser operators precise control over wire placement. Available in 10K yellow gold, this laserwire is a karat parent metal material — not a solder — delivering seamless joins that wear and tarnish at the same rate as the surrounding piece. Each dispenser and refill contains 10 feet of annealed, coiled laserwire in your choice of gauge.
The laser welding wire is housed in a sealed, see-through compartment at the rear of the dispenser. Simply roll the fingertip rollers forward to feed wire through the stainless steel guide tube, or reverse direction to retract. The guide tube supports the wire as close as 2mm from the weld point, allowing precise positioning without moving your hands or repositioning the workpiece — saving valuable time and reducing refocusing steps.
Speedwire dispensers are color coded by metal type and clearly labeled with wire gauge and metal quality. The sealed compartment keeps wire clean and tangle free, and the transparent housing lets you monitor remaining wire at a glance. Refills drop directly into the existing dispenser, making one dispenser last indefinitely.
Features
- Fingertip roller mechanism feeds or retracts wire with precision
- Stainless steel guide tube supports wire within 2mm of the weld
- Sealed, transparent rear compartment keeps wire clean and tangle free
- Color coded by metal type; clearly labeled with gauge and metal quality
- Reduces accidental finger burns by eliminating direct wire handling
- Karat parent metal wire — not a solder — produces seamless, uniform joins
- Refills available so one dispenser can be reloaded indefinitely
- Each dispenser and refill contains 10 feet of laserwire
Specifications
| Metal | 10K Yellow Gold |
|---|---|
| Wire Type | Laser welding wire (parent metal, not solder) |
| Wire Length | 10 feet per dispenser or refill |
| Guide Tube Material | Stainless steel |
| Wire Condition | Annealed and coiled |
Available Options
| Part # | Gauge | Diameter | Option |
|---|---|---|---|
| 807-850 | 30 Ga. | .010″ / 0.25mm | With Dispenser |
| 807-850RF | 30 Ga. | .010″ / 0.25mm | Refill Only |
| 807-852 | 32 Ga. | .008″ / 0.20mm | With Dispenser |
| 807-852RF | 32 Ga. | .008″ / 0.20mm | Refill Only |
Notes
- Speedwire laserwire is a karat metal filler material, not a solder. Laser welding uses the parent metal as the filler for seamless results.
- Refill units are designed to fit directly into the Speedwire dispenser housing.
- First-time users should select the dispenser option; subsequent purchases may use the refill-only option.
Rezensionen
Es gibt noch keine Rezensionen.